Compressed airline breathing apparatus (CABA) or powered fresh air hose breathing apparatus (FAHBA) with hood, helmet or visor

General information

CABA Or Powered FAHBA With Hood, Helmet Or Visor

General information

  • Flow indicators and alarms are needed.
  • If fitted to an airline suit, the protection factor is 200.
  • This BA is designed to provide protection factors of 10, 20 and 40.
  • This BA can be cleaned and reused many times, as recommended by the manufacturer.
  • It is also suitable for a heavy work rate (heavy manual work requiring a lot of exertion and energy).
  • The BA may be worn continuously for more than one hour and may be used in oxygen deficient atmospheres.
  • The BA is adequate for medium work rate (work involving sustained hand and arm movements, or similar to brisk walking).
  • 'Constant flow' means that the manufacturer or user sets the air supply rate. This gives a constant flow rate at the selected air supply pressure.


  • Fit the straps / cords as recommended.
  • Select the right type of hood for the task.
  • Select the right size of hood for each wearer.
  • Ensure that an adequate clean air supply is available.
  • After use, always clean the BA and store it in a clean place.
  • Fit-testing for each wearer is required when using this RPE for the first time.
  • Ensure that the compressed air quality meets the minimum requirements of BSEN12021.
  • Ensure that the air line is never deformed - the wearer's life may be at risk without an adequate air supply.


  • Store in dirty areas between uses.
  • Make DIY modifications to the RPE.
  • Use solvents to clean the mask, straps or hose.
  • Allow the airline to come into contact with solvents.
  • Keep working if the airflow rates drops or any of the warning signals are activated.
  • Use a light-duty airline hose where there is any potential for crushing by passer-by etc.

Find out more